CL30 – Segmented Rim Diamond Blade
CL30 – Segmented Rim Diamond Blade
CL30 – Segmented Rim Diamond Blade

EN13236

CL30 – Segmented Rim Diamond Blade

General Purpose

Classic

Marble
Hard Concrete
Granite
Concrete Roof Tile
Concrete Slabs
Concrete Blocks
Bricks
Paving Bricks
Wet Cutting
Dry Cutting

Cat® Classic General Purpose super hot press segmented diamond blades have a unique bond formulation. Designed for use on a wide range of hard and medium hardness building products. Offering good cutting performance and speed of cut. Can be used wet or dry, however life and blade performance will increase with wet cutting and decrease on more abrasive materials. The CL30 is the ideal choice for contractors wanting a high quality, fast, long life blade.

Attributes

  • 1.5X LIFE - 1.5X SPEED
  • High quality diamond grit
  • Fully hardened & heat treated steel core
  • Super hot press technology
  • Good span of application & cut
  • Aggressive fast cut
  • Keyhole gullet

To see the full product details table, please rotate your device.

Product Type Diameter Segment Height Segment Width Main Arbor - Bore Reducing Rings Included Machines Used
See Key
Part No Code No MM Inch MM Inch MM Inch MM Inch MM Inch
DA11002 CL30105 105 4 10 0.394 1.8 0.071 20 20mm 20 - 15.88 20mm - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA11003 CL30110 110 4 1/3 10 0.394 1.8 0.071 20 20mm 20 - 15.88 20mm - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA11004 CL30115 115 4 1/2 10 0.394 1.8 0.071 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA11005 CL30125 125 5 10 0.394 2 0.079 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA11006 CL30150 150 6 10 0.394 2.0 0.079 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderAngle Grinder (Large)Cordless GrinderFloor/Wall Chaser
DA11007 CL30180 180 7 10 0.394 2.2 0.087 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderAngle Grinder (Large)Floor/Wall ChaserTable Saw
DA11008 CL30230 230 9 10 0.394 2.4 0.094 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderAngle Grinder (Large)Floor/Wall ChaserTable Saw
DA11009 CL30250 250 10 10 0.394 2.6 0.102 25.4+P 1+P 25.4 - 22.23, 25.4 - 20 1 - 7/8, 1 - 20mm Angle GrinderAngle Grinder (Large)Table Saw
DA11010 CL30300 300 12 10 0.394 3.0 0.118 20 20mm N/A N/A High Speed SawTable SawBridge SawBrick Saw
DA11011 CL30350 350 14 10 0.394 3.2 0.126 25.4+P 1+P 25.4 - 20 1 - 20mm High Speed SawTable SawTile Saw

Application

CONCRETE KERBS, CONCRETE SLABS , LIMESTONE AGGREGATE CONCRETE, CONCRETE PAVIOURS, CONCRETE PIPE, CONCRETE ROOF TILE, SOFT FACING BRICKS, CONCRETE BLOCKS OVER 15N/MM², HARD SANDSTONE (FINE GRIT), SOFT SLATE, MEDIUM SANDSTONE (MEDIUM GRIT), CONCRETE WITH MEDIUM SHARP SAND, SOFT SANDSTONE (COARSE GRIT), CONCRETE SCREED, PLASTER – GROUT, GRANITE, MARBLE.

MEDIUM FACING BRICK, HARD SLATE, RIVER GRAVEL CONCRETE, LIGHT REINFORCED CONCRETE, BASALT, LIGHT REINFORCED CONCRETE LINTELS, HARD LIMESTONE, MARBLE, CONCRETE BLOCK UNDER 15N/MM², THERMAL BLOCK 7 N/MM².

MEDIUM AGGREGATE CONCRETE (TRAPROCK – QUARTZ), MEDIUM SOFT AGGREGATE CONCRETE (GRANITE – LIMESTONE), REFRACTORY BRICK, HARD FACING BRICK, TRAVERTINE, PORPHYRY, CLASS B ENGINEERING BRICK 75N/MM², MORTAR JOINTS (HARD), MORTAR JOINTS (ABRASIVE SANDS), LAVA ROCK, PUMICE.

CRITICALLY HARD AGGREGATE CONCRETE (FLINT, CHERT), HARD TO MEDIUM AGGREGATE CONCRETE (CHERT – TRAP ROCK – RIVER GRAVEL), DENSE CLAY PIPE, CLASS A ENGINEERING BRICK 125 N/MM², CLAY PAVIOURS, CLAY ROOF TILES, ASPHALT OVER CONCRETE (SHARP SAND).

Key

Correct bond for application optimal performance, speed & life

Good match bond for application excellent performance speed & life

Acceptable bond for application reduced performance, speed & life

Occasional use only - much reduced performance, speed & short life - glazing & premature wear will occur

Let's do the work Download Brochure

© 2022 Cat® Diamond Tools

This website uses cookies to improve your user experience. If you continue on this website, you will be providing your consent to our use of cookies.

Translate »