CLT30 – Turbo Continuous Rim Diamond Blade
CLT30 – Turbo Continuous Rim Diamond Blade
CLT30 – Turbo Continuous Rim Diamond Blade

EN13236

CLT30 – Turbo Continuous Rim Diamond Blade

Hard Materials

Classic

Marble
Hard Concrete
Granite
Concrete Roof Tile
Concrete Slabs
Concrete Blocks
Bricks
Paving Bricks
Wet Cutting
Dry Cutting

Cat® Classic Hard Materials hot press turbo diamond blades are designed for fast precise cutting of a wide range of hard and medium hardness building materials. Fast precise cuts and fair life. Dry or wet cut. Life and performance will increase with wet cutting. Equally spaced cooling holes around the periphery of the segments keep the blade cool during cutting and dissipates the heat from the diamond bond. The CLT30 is the ideal choice for contractors wanting a high quality, fast, long life blade.

Attributes

  • 1.5X LIFE - 1.5X SPEED
  • High quality diamond grit
  • Fully hardened & heat treated steel core
  • Good span of application & cut
  • Super hot press technology
  • Fast & precise cut
  • Turbo segment
  • Vented cooling holes for rapid heat dispersion.

To see the full product details table, please rotate your device.

Product Type Diameter Segment Height Segment Width Main Arbor - Bore Reducing Rings Included Machines Used
See Key
Part No Code No MM Inch MM Inch MM Inch MM Inch MM Inch
DA11012 CLT30105 105 4 7 0.276 2.0 0.079 20 20mm 20 - 15.88 20mm - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA11013 CLT30110 110 4 1/3 8 0.315 2.0 0.079 20 20mm 20 - 15.88 20mm - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA11014 CLT30115 115 4 1/2 7 0.276 2.0 0.079 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA11015 CLT30125 125 5 7 0.276 2.2 0.087 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA11016 CLT30150 150 6 7 0.276 2.4 0.094 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderAngle Grinder (Large)Cordless GrinderFloor/Wall Chaser
DA11017 CLT30180 180 7 7 0.276 2.6 0.102 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderAngle Grinder (Large)Floor/Wall ChaserTable Saw
DA11018 CLT30230 230 9 7 0.276 2.8 0.110 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20mm, 7/8 - 5/8 Angle GrinderAngle Grinder (Large)Floor/Wall ChaserTable Saw
DA11020 CLT30300 300 12 7 0.276 2.8 0.110 20 20mm N/A N/A High Speed SawTable SawBridge SawBrick Saw
DA11021 CLT30350 350 14 7.5 0.295 3.2 0.126 25.4+P 1+P 25.4 - 20 1 - 20mm High Speed SawTable SawBridge SawBrick Saw

Application

★★★★

HARD FACING BRICK, CLAY PAVIOURS, VITRIFIED CLAY PIPES, CLAY ROOF TILES, QUARRY TILES, TERRACOTTA , INDIAN STONE (KOTA), TRAVERTINE, PORPHYRY, CLASS B ENGINEERING BRICK 75N/MM², HARD SLATE , RIVER GRAVEL CONCRETE, LIGHT REINFORCED CONCRETE, BASALT, CONCRETE KERBS, CONCRETE SLABS, LIGHT REINFORCED CONCRETE LINTELS , HARD LIMESTONE, LIMESTONE AGGREGATE CONCRETE, CONCRETE PAVIOURS, CONCRETE PIPE, CONCRETE ROOF TILE, GRANITE, MARBLE.

★★★

DENSE CLAY PIPE, CLASS A ENGINEERING BRICK 125 N/MM², MEDIUM FACING BRICK, SOFT FACING BRICKS, REFRACTORY BRICK, CONCRETE BLOCKS OVER 15N/MM², HARD SANDSTONE (FINE GRIT), SOFT SLATE , MARBLE , MEDIUM SANDSTONE (MEDIUM GRIT).

★★

GRANITE, HEAVILY STEEL REINFORCED CONCRETE, CRITICALLY HARD AGGREGATE CONCRETE (FLINT, CHERT), HARD TO MEDIUM AGGREGATE CONCRETE (CHERT - TRAP ROCK - RIVER GRAVEL) , MEDIUM AGGREGATE CONCRETE (TRAPROCK - QUARTZ), MEDIUM SOFT AGGREGATE CONCRETE (GRANITE - LIMESTONE) , CONCRETE WITH MEDIUM SHARP SAND, PLASTER - GROUT.

★

SOFT SANDSTONE (COARSE GRIT), CONCRETE SCREED, CONCRETE BLOCK UNDER 15N/MM², THERMAL BLOCK 7 N/MM².

Key

★★★★

Correct bond for application optimal performance, speed & life

★★★

Good match bond for application excellent performance speed & life

★★

Acceptable bond for application reduced performance, speed & life

★

Occasional use only - much reduced performance, speed & short life - glazing & premature wear will occur

Data Sheet Find your nearest stockist
Let's do the work Download Brochure

© 2022 Cat® Diamond Tools

This website uses cookies to improve your user experience. If you continue on this website, you will be providing your consent to our use of cookies.

More information Accept Decline
Translate »