VX30 – Segmented Rim Diamond Blade
VX30 – Segmented Rim Diamond Blade

EN13236

VX30 – Segmented Rim Diamond Blade

General Purpose

100 Value

Hard Concrete
Concrete Roof Tile
Concrete Slabs
Concrete Blocks
Bricks
Paving Bricks
Wet Cutting
Dry Cutting

Cat® 100 Value General Purpose segmented diamond blades have a bond formulation designed for use on a wide range of products. Offering good cutting performance and speed of cut. Can be used wet or dry, however life and blade performance will increase with wet cutting and decrease on more abrasive materials. The perfect choice for the enthusiast / occasional user and smaller size jobs who want fair life and speed of cut.

Attributes

  • 1.5X LIFE - 1.5X SPEED
  • HIGH QUALITY DIAMOND GRIT
  • FULLY HARDENED AND HEAT TREATED STEEL CORE
  • GOOD SPAN OF APPLICATION AND CUT
  • AGGRESSIVE FAST CUT
  • KEYHOLE GULLET.

To see the full product details table, please rotate your device.

Product Type Diameter Segment Height Segment Width Main Arbor - Bore Reducing Rings Included Machines Used
See Key
Part No Code No MM Inch MM Inch MM Inch MM Inch MM Inch
DA20002 VX30105 105 4 7 0.276 1.8 0.071 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20, 20 - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA20003 VX30110 110 4 ⅓ 7 0.276 1.8 0.071 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20, 20 - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA20004 VX30115 115 4 ½ 7 0.276 2 0.079 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20, 20 - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA20005 VX30125 125 5 7 0.276 2 0.079 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20, 20 - 5/8 Angle GrinderCordless GrinderFloor/Wall ChaserMarble Cutter
DA20006 VX30150 150 6 7 0.276 2.2 0.087 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20, 20 - 5/8 Angle GrinderAngle Grinder (Large)Cordless GrinderFloor/Wall Chaser
DA20007 VX30180 180 7 7 0.276 2.4 0.094 22.23 7/8 DM - 15.88, 22.23 - 20 DM - 5/8, 7/8 - 20 Angle GrinderAngle Grinder (Large)Floor/Wall ChaserTable Saw
DA20008 VX30230 230 9 7 0.276 2.5 0.098 22.23 7/8 22.23 - 20, 22.23 - 15.88 7/8 - 20, 7/8 - 5/8 Angle GrinderAngle Grinder (Large)Floor/Wall ChaserTable Saw
DA20009 VX30250 250 10 8 0.315 2.8 0.110 25.4 1+P 25.4 - 22.23, 25.4 - 20, 20 - 15.88 1 - 7/8, 1 - 20mm, 20mm - 5/8 Angle GrinderAngle Grinder (Large)Table Saw
DA20010 VX30300 300 12 7 0.276 3 0.118 25.4+P 1 +P 25.4 - 20 1 - 20 High Speed SawTable SawBridge SawBrick Saw
DA20011 VX30350 350 14 8 0.315 3.2 0.126 25.4+P 1+P 25.4 - 20 1 + P -20mm High Speed SawTable SawBridge SawBrick Saw

Available in USA, non-oSa accredited.

Application

CONCRETE CURBS, CONCRETE SLABS , LIMESTONE AGGREGATE CONCRETE, CONCRETE PAVERS, CONCRETE PIPE, CONCRETE ROOF TILE, SOFT FACING BRICKS, CONCRETE BLOCKS OVER 15N/MM², HARD SANDSTONE (FINE GRIT), SOFT SLATE, MEDIUM SANDSTONE (MEDIUM GRIT), CONCRETE WITH MEDIUM SHARP SAND, SOFT SANDSTONE (COARSE GRIT), CONCRETE SCREED, PLASTER – GROUT.

MEDIUM FACING BRICK, HARD SLATE, RIVER GRAVEL CONCRETE, LIGHT REINFORCED CONCRETE, BASALT, LIGHT REINFORCED CONCRETE LINTELS, HARD LIMESTONE, MARBLE, CONCRETE BLOCK UNDER 15N/MM², THERMAL BLOCK 7 N/MM².

MEDIUM AGGREGATE CONCRETE (TRAPROCK – QUARTZ), MEDIUM SOFT AGGREGATE CONCRETE (GRANITE – LIMESTONE), REFRACTORY BRICK, HARD FACING BRICK, TRAVERTINE, PORPHYRY, CLASS B ENGINEERING BRICK 75N/MM², MORTAR JOINTS (HARD), MORTAR JOINTS (ABRASIVE SANDS), LAVA ROCK, PUMICE.

CRITICALLY HARD AGGREGATE CONCRETE (FLINT, CHERT), HARD TO MEDIUM AGGREGATE CONCRETE (CHERT – TRAP ROCK – RIVER GRAVEL), DENSE CLAY PIPE, CLASS A ENGINEERING BRICK 125 N/MM², CLAY PAVERS, CLAY ROOF TILES, ASPHALT OVER CONCRETE (SHARP SAND).

Key

Correct bond for application optimal performance, speed & life

Good match bond for application excellent performance speed & life

Acceptable bond for application reduced performance, speed & life

Occasional use only - much reduced performance, speed & short life - glazing & premature wear will occur

Let's do the work Download Brochure

© 2024 Cat® Diamond Tools

This website uses cookies to improve your user experience. If you continue on this website, you will be providing your consent to our use of cookies.

Translate »